Tempe
Outlet & Switch Installation in Tempe.
- (480) 771-3252
- Serving the entire Phoenix metro — we come to you
- Office: Mon–Fri 8:00 AM – 5:00 PM · 24/7 emergency service
- 2-year workmanship warranty · 1-year parts warranty
- Veteran-owned & operated · residential + commercial
- 59 five-star Google reviews
Tempe is landlocked, so it never got the fresh subdivisions that let other Valley cities outrun their wiring. The housing core here dates to the fifties, sixties, and seventies, and those bedrooms were given two receptacles apiece in an era when a household owned one television. Now a single ASU-area rental can hold a lease with five names on it, each name traveling with a laptop, monitors, a mini fridge, and a phone that charges overnight, and the daisy-chained power strips tell the story. Yeti Pros, veteran-owned and licensed under AZ ROC #363423, installs outlets and switches across exactly this landscape: landlord additions between tenants, aluminum-era device corrections in mid-century blocks, bedroom circuits that end the power strip arms race, and full receptacle layouts for the ADU conversions sprouting on Tempe's small lots. We know what block wall construction means for routing, we know which decades demand CO/ALR rated devices, and we know the difference between a house that needs more outlets and one that needs more circuits. In this city, that difference is the whole job.
ZIPs served: 85281, 85282, 85283, 85284
What Outlet & Switch Installation covers in Tempe.
Landlord Outlet Additions
Between-tenant receptacle and switch work for ASU-area rentals: added bedroom outlets for dense occupancy, scorched and loose devices replaced, GFCI brought current in kitchens and baths, all staged around lease dates so units never sit dark.
Aluminum Rated Device Retrofits
CO/ALR receptacles and switches for Tempe's mid-sixties to early-seventies homes, installed with torqued terminations and a conductor-condition check at every box, because aluminum circuits forgive nothing about bargain devices or rushed work.
Bedroom Circuit Additions
New AFCI protected circuits into rooms whose plug loads outgrew mid-century wiring, ending the daisy chain of power strips with receptacles where desks and beds actually sit and capacity that matches how Tempe students and remote workers live.
Masonry Wall Outlet Installs
Receptacles added to Tempe block construction using attic drops, furred sections, and adjacent frame walls where the house allows, with surface raceway quoted as the honest alternative when the masonry offers no concealed path worth its cost.
ADU Receptacle Layouts
Complete outlet and switch layouts for garage conversions and backyard casitas, meeting current spacing, small-appliance circuit, and protection requirements as part of the permitted conversion rather than patched in after the inspector finds the gaps.
Kitchen and Bath GFCI Updates
Ground-fault protection added where Tempe's older kitchens and bathrooms predate the requirement, using devices fitted to shallow mid-century boxes, a small upgrade that removes one of the oldest shock risks these houses still carry.
What we see for outlet & switch installation in Tempe.
The mid-century core around Maple-Ash and the university neighborhoods shows its age in specific, fixable ways. Houses from the mid-sixties into the early seventies frequently carry aluminum branch wiring, so every device swap becomes a hardware decision: CO/ALR rated receptacles and switches, torqued terminations, and an honest look at conductor condition while the plates are off. Block wall construction is the standing routing question, and the answer changes house by house, sometimes attic drops down furred walls, sometimes interior frame walls carrying the new runs, occasionally a tidy surface raceway where masonry leaves no polite alternative.
Tempe's rental economy generates its own catalog. Landlords call between tenants for the additions that dense occupancy demands: more bedroom receptacles so cords stop crossing doorways, GFCI updates in kitchens and baths that predate the requirement, scorched or loose devices swapped before the next lease starts, and overloaded-circuit complaints traced to their real cause rather than reset and forgotten. Where a bedroom's plug load has genuinely outgrown its share of a circuit, we add a run instead of another receptacle on the same strained wire. ADU conversions round out the picture, garages and casitas becoming dwellings that need receptacle spacing, small-appliance circuits, and protection brought fully to current code, not sprinkled in where convenient.
- 01 Airflow and static pressure
- 02 Electrical: capacitors, contactors, draws
- 03 Refrigerant-circuit behavior
- 04 Drains, safeties, and float switches
- 05 Thermostat, controls, and cycling
- 06 Ducts, returns, and room-by-room comfort
How the job typically runs.
With Tempe landlords, the calendar is the service. Turnovers cluster hard around semester breaks, so we book outlet work into the gap between leases, coordinate access with property managers or tenants directly when asked, and quote arrival windows that hold, stated honestly for wherever the property sits in the city. Owner-occupants get the same treatment without the lease math. Every job starts with an electrician on site, tracing circuits and opening a few plates before pricing anything, because mid-century houses punish assumptions. The flat-rate quote arrives in writing with the scope itemized and the permit question answered specifically: if the work permits through the City of Tempe, the quote says so and we run that process. Any diagnostic fee gets stated during the phone call, before booking, not discovered afterward. Then the work happens on the scheduled day, and every install carries two years of written workmanship coverage plus the manufacturer's one-year warranty on parts.
- 01 Booking, with the diagnostic fee disclosed
- 02 In-person diagnosis with real readings
- 03 Written flat-rate quote before work begins
- 04 The work: repair, install, or maintenance
- 05 Startup, documentation, and warranty handoff
Like-for-like device replacement, even the aluminum-era kind done with correct CO/ALR hardware, generally needs no permit. Added circuits and new receptacle runs typically permit through the City of Tempe and close with inspection, and ADU conversions go further, with plan checks covering the full electrical layout of the new dwelling space. We call the permit line in writing inside every quote. Code catches additions in old houses in ways owners do not always expect: a new bedroom circuit in a sixties block home arrives with AFCI protection and tamper-resistant receptacles, kitchen and bath work brings GFCI requirements forward, and none of it is optional because the house is old. Tempe splits between SRP and APS by address, which matters on service work, but branch circuit work never touches the utility, so for outlet and switch scopes the city is the only office in the loop. Where rental property is involved, clean permits and inspection records also make the paper trail a landlord wants behind them.
Pricing & the 10% military & first responder discount.
Outlet pricing in Tempe follows the company rule: someone looks first, then you get a flat-rate number in writing that does not drift. The look matters more in Tempe than most places because the cost drivers hide in the construction. Fishing block walls takes longer than framed walls, low mid-century attics slow every run and get scheduled around summer heat for the electrician's sake, aluminum terminations add hardware and care per device, and a bedroom that needs a new circuit costs more than one that honestly only needs receptacles. For landlords, we can quote several units or properties in one visit cycle and stage the work between leases, which spends the trip charge once instead of repeatedly. Diagnostic fees are disclosed on the phone before anything is booked. The ten percent military, veteran, and first responder discount applies here the same as everywhere we work.
- 01 Flat-rate written quote after an in-person look
- 02 Diagnostic fee disclosed at booking, credited to the repair
- 03 Financing available on replacements
- 04 2-year workmanship warranty; 1-year manufacturer parts warranty
- 05 10% military, veteran & first responder discount
Why a licensed electrical contractor matters.
FAQs: Outlet & Switch Installation in Tempe.
My tenants near ASU keep overloading circuits. Should I add outlets or circuits?
Depends on what is failing. If plugs are scarce but breakers hold, added receptacles on existing runs may be enough. If breakers trip under normal student life, the circuit itself is saturated and more receptacles would only spread the same overload thinner. We measure the actual loads, then quote the version the building needs. Some Tempe rental complaints are outlet-count problems, others are capacity problems, and the fix only works when it matches the failure.
Is aluminum wiring in a sixties Tempe rental something outlet work can address?
At the device level, yes. CO/ALR rated receptacles and switches, correctly torqued, are the code-recognized way to put safe devices on aluminum branch circuits, and we install them as standard on homes from those years. What device work cannot do is cure damaged or overheated conductors, so we inspect at every opened box and report what we find. You end up knowing whether device-level care suffices or deeper remediation deserves a plan.
Can outlets go into the block walls of a Maple-Ash house without conduit showing everywhere?
Often, yes. Many Tempe block homes have furred interior surfaces or attic access that lets us drop cable invisibly, and interior frame walls can host new receptacles with nothing exposed. Where a solid masonry wall offers no concealed route, we say so and show you the surface raceway option priced honestly beside it. What we do not do is promise invisible routing before we have seen the attic.
Do added bedroom outlets in an older Tempe home trigger AFCI requirements?
New circuits do. Extend or add wiring into living spaces and current code brings arc-fault protection with it, usually at the breaker, along with tamper-resistant receptacles at the new locations. A straight device swap on existing wiring does not trigger it. This is a feature for rental owners, not a burden: arc-fault protection targets exactly the frayed-cord and crowded-plug failures that dense occupancy produces.
Can outlet work be scheduled inside a July turnover window?
Yes, and July is exactly when Tempe landlords need it, between summer session and fall move-ins. Tell us the vacancy window when you call and we book inside it, quote from a walkthrough early in the gap, and finish before carpet and paint close the unit back up. Attic-dependent runs get scheduled for mornings in that season, which we plan for so the timeline holds.
What outlet problems show up most at rental turnover?
Loose receptacles that no longer grip a plug, heat discoloration around heavily used outlets, missing GFCI protection in kitchens and baths, broken tabs and cracked faces, and the signature of overload: every receptacle wearing a power strip. Turnover is the cheapest moment to fix all of it, with the unit empty and access easy, which is why our landlord work clusters between leases rather than during them.
Other services we run in Tempe.
Outlet & Switch Installation in nearby cities.
Looking for something else nearby? All electrical services in Tempe
Phoenix metro: Most days a tech is already working somewhere in the Valley, so same-day appointments happen when the schedule allows. After-hours emergencies are dispatched when a licensed tech is available — a real person answers and tells you the ETA on the call.
Call (480) 771-3252Request an estimate.
No pressure, no door knockers. We look at the electrical, tell you what it needs (and what it doesn’t), and put the number in writing.