Tempe
Ductwork Installation in Tempe, AZ.
- (520) 556-8929
- Serving the entire Phoenix metro — we come to you
- Office: Mon–Fri 8:00 AM – 5:00 PM · 24/7 emergency service
- 2-year workmanship warranty · 1-year parts warranty
- Veteran-owned & operated · residential + commercial
- 23 five-star Google reviews
Tempe is landlocked, built out decades ago, and shaped by two forces no other Valley city balances quite the same way: a university that fills whole neighborhoods with rentals, and a stock of mid-century homes that have been quietly moving air the same way since the 1950s and 60s. Duct work here means talking to landlords as often as owners, and it means crawling into flat-roofed houses where a package unit — not an attic split — feeds the whole place. Yeti Pros designs, replaces, and balances residential duct systems across Tempe, and whether you're an owner-occupant in Maple-Ash or a property manager coordinating a fix before a tenant turnover, ductwork installation Tempe AZ is a service we run to fit your situation, not a template. This veteran-owned and operated crew holds ROC #363372 and ROC #363423, sets every job at a written flat rate, and answers every call with a real person. The older neighborhoods — Maple-Ash, Holdeman, and the mid-century pockets near ASU — tend toward small lots, tight side yards, undersized returns, and ductwork that's simply old, while flat roofs put the equipment and its drops up top where the sun is worst. That combination means no two Tempe duct jobs look alike, and the honest ones start with a look before a quote. Tempe sits in SRP territory, so a leaky duct system shows up on the summer bill fast, and rentals feel it doubly when tenants complain and renewals hang on the comfort. In Tempe, ductwork work often has to fit rentals, flat roofs, and older homes. Call (520) 556-8929 and a live person answers, any hour.
ZIPs served: 85281, 85282, 85283, 85284
What Ductwork Installation covers in Tempe.
Duct System Design (Manual D)
Tempe's mid-century homes were sized for a different era of cooling, and their ducts show it. We calculate the actual air each room needs — orientation, glass, insulation, and the realities of a flat-roof package unit — and size each run for healthy static pressure. On a small-lot Maple-Ash house, that math replaces decades of guesswork.
Full Duct Replacement
When Tempe's older ducts are simply worn out, or reworked once too often by past owners, we pull the system from plenum to boots and install one engineered for the house. On a rental, doing it right between tenants prevents the mid-lease airflow complaint that pulls you back. Paired with a replacement, the plenums are open.
Flex & Rigid Installation
Most Tempe homes end up hybrid: rigid sheet-metal trunks where structure and static pressure demand them, quality insulated flex on the branches. On flat-roof package-unit homes, the rooftop drop and curb transitions need careful metalwork in that full sun. We pull flex tight, seal every joint, and route gentle bends so the promised airflow reaches the register.
Return-Air Additions
Undersized single returns are the rule in Tempe's mid-century stock — one grille feeding a whole house — and they starve the blower and leave back rooms warm. We add returns where they're needed, size them to the system, and use jump ducts or transfer grilles so closed-door rooms breathe — the most common rental fix.
Room Additions & Remodels
Tempe's small lots push growth into additions, garage conversions, and enclosed patios, and the landlocked infill around ASU is constant. Each needs air the original system wasn't built to give, and splicing off the nearest trunk robs rooms that already had enough. We work the load, then add a proper extension with its own return.
Airflow Verification & Balancing
A Tempe duct job is finished when the instruments confirm it, not when the last strap is set. We measure static pressure at the air handler or rooftop unit against the design target, then balance the dampers so every room lands where it should. For a landlord, that written verification is proof a unit performs.
What we see for ductwork installation in Tempe.
Tempe's duct work splits along a line most cities don't have: who's actually making the decision. In the rental-heavy blocks around ASU, we're often working with a landlord or property manager who needs the airflow fixed between tenants and wants the scope and the number in writing before approving anything. In owner-occupied Maple-Ash and Holdeman, it's a homeowner living with a mid-century house that's never had its ductwork rethought. The stock is the same; the coordination is different, and we run the job to match, because a management company and a retiree in a 1958 ranch need different things from the same visit.
The mid-century houses themselves carry predictable problems. Undersized single returns are the rule — one grille asked to feed a whole house — so the blower starves and the back rooms lag every afternoon. The original ducts are simply old, sometimes reworked once or twice by past owners into a patchwork nobody documented, and the small lots and tight side yards common in these neighborhoods make access its own puzzle we solve at the quote rather than at the truck. A homeowner who has lived with warm back bedrooms for years often assumes that's just how the house is; the return fix changes that in an afternoon.
Flat roofs change the game further. A lot of Tempe's older housing runs package units on the roof rather than a split system in an attic, so the supply and return drop through a roof curb, and that curb-to-duct connection is a chronic leak and rattle point baking in full sun. We inspect the drop, seal the transitions, and check the returns feeding it, because a rooftop leak wastes cooling you paid for before it ever reaches a room.
Then there's the calendar. Tempe's August lease turnover creates a hard surge — landlords wanting duct and airflow issues resolved in the narrow window between move-out and move-in — and we schedule around that crunch so a unit's ready when the next tenant arrives.
- 01 Airflow and static pressure
- 02 Electrical: capacitors, contactors, draws
- 03 Refrigerant-circuit behavior
- 04 Drains, safeties, and float switches
- 05 Thermostat, controls, and cycling
- 06 Ducts, returns, and room-by-room comfort
Residential HVAC across the Valley.
Air conditioning, heating, and cooler work at homes across the Phoenix metro.
How the job typically runs.
A Tempe duct project bends to fit who's approving it and when the property's available. It starts at booking, where the service-call fee is disclosed up front and credited toward the work if you move ahead — no vague dispatch charge appearing on the invoice. On site, we diagnose rather than assume: static pressure read at the air handler or package unit, the return checked against the load it carries, older runs inspected, and the flat-roof drop examined where one exists. Every finding is shown with the reading behind it, and for a landlord that documentation is exactly what makes remote approval possible.
Then comes a flat-rate written quote, itemized so design, replacement, return additions, and balancing each carry their own number. For rental properties, we coordinate with the owner or property manager directly, work around tenant schedules, and — during the August turnover crunch — target the narrow window between move-out and move-in so the unit's ready on time. Small-lot access and tight side yards get planned at the quote, not discovered on install morning when a truck can't fit.
When we finish, we verify: static pressure and register airflow measured against the design target, written down, and handed to whoever's on title. If the numbers miss, the job isn't done, and our written warranty stands behind the readings — protection that follows the property, not just the current tenant.
- 01 Booking, with the diagnostic fee disclosed
- 02 In-person diagnosis with real readings
- 03 Written flat-rate quote before work begins
- 04 The work: repair, install, or maintenance
- 05 Startup, documentation, and warranty handoff
In Tempe, whether duct work needs a permit depends on scope. Patching a failed run or adding a single return is minor maintenance and requires no permit at all. A full duct replacement, new runs for an addition, or a redesign that changes the layout typically does, and we pull the mechanical permit under our license, book the inspection, and meet the inspector on site — the fee is already inside your flat-rate quote. On rental property, permitted-and-inspected work matters more, not less: it's the record that protects an owner at sale, at insurance claim, and against any tenant dispute about habitability. For a portfolio owner, that paper trail is worth as much as the airflow itself when a unit changes hands. Tempe inspectors check sealing, support spacing, return sizing, and clearances, including the roof-curb transitions on package-unit homes, and we build to pass on the first visit. Every licensed Arizona contractor answers to the Registrar of Contractors' Minimum Workmanship Standards, the legal floor for the trade — and our written warranty documents balanced-airflow readings the standards never require.
Pricing, financing & the 10% military & first responder discount.
A Tempe duct quote from us is flat-rate and written, not an estimate that drifts once the work opens up — which matters whether you're an owner or a landlord budgeting across a portfolio. After we diagnose, you get a total itemized by scope — design, replacement, return additions, balancing — so an owner-occupant can stage the job and a property manager can approve exactly what a unit needs. The price holds; there's no expiring-today theater and no line item that surfaces after demolition. The service-call fee disclosed at booking is credited toward the work once you proceed, so the diagnostic visit isn't lost money. Financing is available for owners who'd rather keep cash free, with terms shown plainly before you commit. Veterans, active-duty members, and military families — including plenty of the ASU community — receive a 10% military discount, printed openly on the quote and never expiring. When you compare bids across Tempe, read the scope, not just the total; the cheap number usually hides the vaguest work, a costly surprise on a rental you cannot easily revisit.
- 01 Flat-rate written quote after an in-person look
- 02 Diagnostic fee disclosed at booking, credited to the repair
- 03 Financing available on replacements
- 04 2-year workmanship warranty; 1-year manufacturer parts warranty
- 05 10% military, veteran & first responder discount
Why a licensed HVAC contractor matters.
FAQs: Ductwork Installation in Tempe, AZ.
How do you coordinate approvals on Tempe rental properties?
Directly with whoever holds the decision. For Tempe rentals we work with the owner or property manager, not just the tenant, and we build the whole process around remote approval: photos and static-pressure readings up front, a flat-rate written quote itemized by scope, and documented verification when we finish. You approve exactly what the unit needs without standing in the attic yourself. We coordinate access with tenants, keep disruption short, and time the work to your lease calendar, which around ASU means the August turnover window.
Is duct work worth it on an older mid-century Tempe home?
Often it's the single best comfort investment these houses can get. Ductwork installation Tempe AZ owners in Maple-Ash and Holdeman usually live with original or piecemeal-reworked ducts, a single undersized return, and a mid-century layout that never moved air evenly. New equipment on that delivery system underperforms from day one. We measure static pressure and airflow first, then show whether the ducts need targeted fixes or a full replacement. On an old, leaky system in SRP territory, the fix often shows on the summer bill.
My Tempe house has a rooftop unit — how does that affect ducts?
It concentrates the problems at the roof. On flat-roofed Tempe homes with a package unit, the supply and return drop through a roof curb, and that curb-to-duct connection is a chronic leak-and-rattle point baking in full sun all summer. Leaks there dump conditioned air straight into the roof structure, and downstream the returns are often undersized on top of it. We inspect the drop, seal the transitions, check the return sizing, then verify airflow at the registers inside the home, where you actually live and feel it.
Can you finish before an August lease turnover?
That's exactly the crunch we plan for. Tempe's ASU-driven leases turn over hard in late summer, and landlords need airflow and duct issues resolved in the narrow gap between move-out and move-in. We schedule around that window deliberately: a fast diagnostic, a flat-rate quote you can approve remotely, and the work sequenced to finish before the next tenant arrives. Because we book tightly in that stretch, the earlier you call, the better we can hold your date and finish before the unit has to turn over again.
My older Tempe home has tight access and hot back rooms — fixable?
Almost always, and both are common here. The mid-century homes around Maple-Ash sit on small lots with tight side yards, which makes access a planning question we solve at the quote, not a surprise on install day. The back-rooms-never-cool complaint usually traces to a single undersized return starving the system. We measure the static pressure, confirm the restriction, and fix it — typically a properly sized return or a second one — then verify with instruments that the far rooms improved, not just those near the equipment.
Does your warranty stay with the property if I sell?
Yes — the written warranty and documented readings follow the property, not the person. That's meaningful in a rental-heavy market like Tempe, where owners sell, tenants rotate, and a permitted, verified duct job becomes part of the home's record. When we finish, you get the before-and-after static-pressure and airflow numbers, the permit sign-off where one applied, and the warranty terms in writing. At resale or during an insurance question, that folder proves the work was done to standard, worth more than a cheaper job with no record.
Every major brand, serviced and installed.
Phoenix metro: Most days a tech is already working somewhere in the Valley, so same-day appointments happen when the schedule allows. After-hours emergencies are dispatched when a licensed tech is available — a real person answers and tells you the ETA on the call.
Call (520) 556-8929Request an estimate.
No pressure, no door knockers. We look at the HVAC system, tell you what it needs (and what it doesn’t), and put the number in writing.
Need ductwork installation in Tempe? A real person answers.
Other services we run in Tempe.
Ductwork Installation in nearby cities.
Looking for something else nearby? All HVAC services in Tempe